Alan, You'd get better performance from a full fledged processor. I find they are much faster, when doing screen draws and calculations. The fasted machine I have has a 1.7 Athelon processor and "it
I know that I am a relative newcomer to this board, but please consider this: While not suffering having paid for something I didn't get, I am at a point where I can't get the parts I need to finish
do then is to connect the auxiliary electrical pump and the filter fill up again. because I have some air leaks in the fuel circuit. Generally, air is introduced into the system when there is a leak,
Joe, Thanks. I look forward to seeing your seats. I just finished my private in April. Started my build in March, so things fell together pretty smoothly. Best of luck with your flying and building..
List members, EAA Chapter 244 is holding a fly-in at False River Regional airport (HZR), this Saturday and Sunday. The airport is located in New Roads, LA, near Baton Rouge. We have a 5000' x 75' asp
The old number works fine and we got through to the parts guy. cheque prior to despatch of goods. They've got our cheque, so fingers crossed we get the bits tomorrow, we were promised goods would be
Thanks, Dave release, now on 01751 431706 or The old number your cheque prior bits tomorrow, we -- Jeff - A055 http://www.N55XS.com Wings fitted. Doors set. Looking for nose gear parts...
My stuff was over 2 years out of date, so I did some unofficial testing, on my own. The mixture will delaminate fiberglass layups, so I felt safe using it, and did... -- Jeff - A055
for the a XM I built my own conduits, using 1 x 2 wooden firing strips, covered with plastic tape. I laid them on my table, on a piece of sheet plastic and then laid up two plys of BID wide enough to
I opted for an Aeorpoxy alternative used in the construction of Velocity A/C (don't have the number in front of me). Call their tech and discuss the options. I believe I paid about $39 plus shipping
Tony, Email John Wheeler at john@europa-aircraft.com John's been great at handling my orders and has gone out of his way to see to it that everything is shipped in a timely manner. I'm sure he'd be i
Just wanted to share my experience. Just recently, I contacted John Wheeler at Europa to order a few parts. John was quick to respond to my inquiries, providing availability and pricing, including sh
There was a thread, several months ago, about the fix. Search the archives and you'll probably find the answer... -- Jeff A055 Builders Log: http://www.N55XS.com
lot of pressure. Sven, I had mega problems filling and bleeding the system. First, disassemble the master cylinder and check the the two nylon washers are not binding in the bore. Mine were, so I san
Richard, Do you have specifications for the seals that you used? Or better yet, manufacturer and part numbers? Thanks, -- Jeff - A055 Builders Log: http://www.N55XS.com
2" Using the information supplied by Bob at Flight Crafters, I left the opening, as is and added a firewall behind it. I plan to omit the Europa firewall. The idea is to get all the hot air out of th