Tony, That RS website certainly is! I tried to find Hematite, but nearly got a haemoroid doing so. Gave up, but I have had a "Wild Turkey and Dry" . Have you had that mix, it is really nice. " Reg To
Gidday, I have installed the magnetic fuel gauge as per the instructions exactly. I have a problem that the hole for the tank fitting is at the union of 2 surfaces, either side of the seam. The angle
Brian, I am hoping that the Hermetite Gold Sealant that others have talked about will do the trick. I may be able to tighten the studs up a bit tighter, but I am glad that I haven't done it to date a
Paul, I have researched the teflon option a little bit, and I know that there are specific fittings for it. Go to http://www.speedflow.com.au/ Quote: "All Speedflow hose ends are reuseable type not o
Paul, Try using Aeroquip FC-650 like Mal??? It will satisfy all the things you want. Reg Tony Renshaw P.S. without the problems of Teflon needing special fittings. I think I will use Aeroquip FC-650
Gidday, I have searched my overloaded e-mail program to find a message from someone who gave me great guidance regarding the use of a 37 degree flairing tool. The problem is that I can't find it to r
Tony, Thanks for the tips. What tension have you used, or is it simply a feel thing? I have always overtightened things, but I think I am getting a little better. Would you use Hermetite on the AN fi
Gidday, Sorry to keep going on about this but I have a problem, I think. The flairing tool I have appears to be high quality, but there are a couple of areas where I am unsure. IT is a Parker Rolo-Fl
Calling David Cripps, I am wondering if you have received any of my e-mails concerning Ampreg 22 in my Europa build? Anyone knowing how I can get in touch with him via private e-mail, I'd appreciate
Fred, Below is a message either of mine, or one that sounds very similar. So, I am unsure where you are going with this, in terms of other options that you are not mentioning in this e-mail. So, how
Fred and co, Between you and Brian I think the best option might be to dangle the lead down during refuelling, and pull it out again for flight. Would you agree that is the best optioin, and if not,
Fred and co, Between you and Brian I think the best option might be to dangle the lead down during refuelling, and pull it out again for flight. Would you agree that is the best optioin, and if not,
Graham, Haven't decided what to do with this static situation, but I like the aluminium elbow like you helped install on Paul Macs a/c. Poor old bugger is Mac, with his Achiles tendon. Did you hear a
Gidday, I am wondering if the Europa supplied hose is adaquate for this task, as mine appears to gape around the reinforcement at the outer edge of the hose clamp. This may well be normal, but it mak