Hi I'm trying to get a supplier in the UK for the plastic quick connect couplings for the pitot static lines in the wing root. Any help would be appreciated. Regards David Steade
Hi All Now that Jerry has stopped supporting the Arplast Prop in the UK does anyone have a good contact at the Factory who can be contacted in English for the supply of spares and service? Regards Da
Fred I used .080" (2mm) seemed about right . After I cut all the holes there is not much left and the panels have to support a lot of weight after they are populated. Regards David Steade
Remi A friend had this problem for a long time on a Ban-Bi. It was ultimately solved by fitting a new sprag clutch. I assume you have the heavy duty starter motor fitted with a good battery and leads
John I used Aerodur white topcoat and Barrier Primer supplied by "Pexa, Springwood Business Park, Burrwood Way, Holywell Green, West Yorkshire, HX4 9BJ tel 01422 314400 Regards David Steade
Hi All I have just fitted the oil cooler into the duct on my tri-gear XS. To improve the cooling I have lowered the cooler by two inches as suggested in past posts. The clearance between the steel tu
Hi All A bit more guidance please . Now I'm fitting the exhaust to my Tri-gear. Its the latest oval design. The heat shield on mine is very close to the nut on the sump banjo fitting. Is this normal?
Hi All I've Just got to the position where I seriously have to make a decision regarding upholstery for my XS trigear. I'm looking to use fabric rather than leather but apart from that then I am fair
Hi All It seems that there are no commercial suppliers of upholstery in the UK. My request for contacts has resulted in the suggestion of Matthew Leach but he has been out of contact for over a year