Hello Jeff "I must have missed part of this thread so tell me if I'm wrong here." You must have missed my first post. Go to : http://www.europaowners.org/ Scroll down to: Matronics Listserver For fir
Hello Richard "Is there a stand alone fuel flow gauge which uses the Flowscan transducer ? I imagine it would be digital but analog would be fine. Any users out there ? Supplier ? UK or US ? Gauge on
Just heard a tale by a friend test flying a RV. 1st flight, go up and about, did a series of stalls, all OK. Wants to do a flyby, gets on downwind with perhaps 16 or 1500 RPM, turns base to final and
Figured I would share some info I just got from Scott @ Aeropoxy. I am ready to bond in place my rollbar/shoulder harness attachment, and would like fill the corner gap with flox to provide a nice ro
Hello Thomas I know on the 914 that the torque is different as compared to the manual I downloaded (bout a year aga with updates) if you use the Whacker thermal conductive compound. The Whacker use i
Has anyone changed the cooling air intake location and shape (diffuser) for a XS / Rotax install? It seems that if the duct was slight shorter with a proper shaped lip, something like the Katana Extr
Hello Graham this How exact is exhaust extraction accomplished on EZ? How about spraying water on the radiator during extended ground operations and temps creep high, anyone try this? Ron Parigoris
Hello John Just a quick idea that may solve your problem. I am using safety torx screws as a door lock (tapped into wood and aluminium of handle into a strike). The safety torx is a torx with a pin i
Hello Danny I have a Becker 4201 and TRT250. Also using a PS Engineering PMA-4000-IRS audio panel. Sorry but can't help out with using 4201, havn't yet fired it up. I used a flycutter to cut holes, t
Hello Ian I agree that traditional machining of panel is a viable means of accomplishment. Once laid out, a flycutter works great. I takes just a bit of diddling to get size correct, but once it is,
As far ab breaking a Europa in flight: My partner designed a short wing Europa in X-Plane. One thing that was a real eye opener was looking at stress lines seeing just how much the tips of the wings
Hello David "In Don Dykin's booklet about Europa aerodynamics he says that the flaps take just about half of the plane's weight at top flap speed. With aerodynamic forces increasing with speed square
"It is necessary to remove manually the two filters frequently after each fly because during 100 first flight hours there is some impurity's into the filters."\ I made a box for 2 Andair 375s that go
I stole ideas for Modular Fuel System from Ian, Ferg and others. A bit hard to tell from pic but instead of using a "T" to split the in line, and culminate the out line, I used beautiful injection mo
I will share with group my boring findings about 914 fuel pumps. I am using Europas recommended schematic, only difference is I am using Andair 375 Gasculators instead of supplied filters. For testin
I have fuel tank vent on my XS Monowheel plumbed to the top of the Cobra, a small space (siphon break) and the vent hose comes out. Was wondering if I could get input on: Attempt to cut down clogging
Anyone have an old 914 fuel pump? I want to disect and study 1 way valve and vane pump. Thx. Ron Parigoris 44 Carriage Drive Kings Park, New York 11754 USA
Hello Scott "found a corroded exhaust seat" I read your post with interest. First off you speak of corrosion and corroded exhaust seat. Is it perhaps "Erosion" as in burning it up in use? How is the
Our Monowheel XS with a 914 and Airmaster has both short and long wings. Will have servo trim tab for roll on both. Will fly short first for a while. I was wondering if I could get opinions on rudder