Team I don't know if anyone else has been having trouble reading the list of completed Mod 73 aircraft. I have. I just get a list with one item on each line. I have taken the liberty of creating some
Second attempt - one picture in each mail ! Dear Jos and all Europaphiles Wow an opportunity to push what I do ! Sometimes. So long as you don't have H20-10 (H10-20 is OK) I convert headsets to ANR u
To all those who ordered pip pins and sent me envelopes - they are on their way to you ! Please let me know when they arrive. They fitted OK on mine ! Richard Holder G-OWWW High Cross, ungrounded as
Any intercom within a radio with only one microphone circuit (rather than one per headset) is not a proper intercom. Any paralleling of mikes will cause problems if you parallel a DC set (low impedan
Yup. FORTY POUNDS plus VAT plus carriage for 2 x pins 2 x M12 Nylocs 2 x M12 "thick" washers The Nylocs are 8 a hundred from RS ! Washers unlikely to be more ! I won't say what I think of this ! Rich
Pictures of my solution attached. The nosewheel axle through bolt is an Allen wrench headed "machine screw" (provided by Europa), Onto this fits a stainless steel collar which sticks out through the
"There is only one, on the port side". I mean the starboard side - DOH ! Apologies for the dust and dirt, and I should fix the spat so tha the two halves fit better ! Richard Holder G-OWWW, High Cros
I got this through the post from the CAA this morning. It refers to PFA 247/FSB-004 Issue 4. I have issue three. Where is issue 4 ? Richard Holder G-OWWW High Cross
You were in the right place. It is under "Service Bulletins" on the "Technical" page on the europa-aircraft.co.uk site Richard Holder G-OWWW High Cross
Hi Nigel What about a DOTH at Wycombe Air Park ? Voucher in Flyer. Restaurant is good. If you decide on Panshanger let me know and I will drive over - It will take longer to open up the hanger and pu
Bob I can confirm you have to use the 4-6 rivets which ACS sell, and so do Europa. This is because the backplate is ali and is thicker. Steel backplates are thinner and use 4-4 rivets ! ACS also sell
RTFM ! It is 150 INCH pounds ! And the nuts are brass coloured; definitely NOT aluminium or even aluminum ! When in douibt follow the manual - and read it several times at different times with an ope
Shown on the Europa site as Mod 60. Could be still available if it is shown :-) The capacitive meter reads differently for Mogas and Avgas I believe. Richard G-OWWW High Cross