Hi all, I have just finished re making the ceiling panel and I want to put in some over head lighting. I was wondering what others have done. I would like to use an existing fitting of some kind rath
less The accident statistics would suggest otherwise. Take a look at the NSTB web site and compare the accident rates between light twins and single engine aircraft, it makes very interesting readin
Hi All I picked up this interesting posting regarding the Vertex (Yaseu) Aviator Pro. I was thinking of buying one until I read this. Hello, I thought you might be interested and amazed at the exchan
Fred, I was attracted to the Yaseu unit because of their long history of producing products for the amateur radio community. My concern here is how the manufacturer treat you when you have a problem.
Hi all, I noticed that a few folk are replacing the rubber hoses with the (rather expensive) 666 hose. This stuff has a Teflon interior and should be pretty impervious to any additives that are in au
Jim, Maybe you did what I am thinking of doing. I'd like to remove all of the rubber fuel lines in my Europa and replace them with 666 hose. I don't want to go to the trouble of putting AN style fitt
Hi Eddie, I have just been down this road and I would encourage you to fill it. I found that I could apply really thin layers of SuperFil by gently heating it and applying it with the widest plaster'
Alan, Take a look at http://europa363.versadev.com/mar-00.html for some ideas. Unfortunately it didn't show a photo of the bracket that attaches to the torque tube. I manufactured a saddle out of 10
Hi All, I made some cable ducts under the door still using balsa wood with a layer of bid on each side. I went the complete length of the door sill. The balsa was laid up from the bottom of the door
Mike, I seem to recall I took 450 grams, but it was a while ago and I can't be sure. I documented what I did at http://europa363.versadev.com/dec-99.html Regards, Paul to panel will vary kit to kit)
Hi All, This would be a question for the factory if it wasn't a weekend. The engine manual does not give much indication as to how the cable is fastened to the carburetor. I have tried clamping it un
Hi all, I wanted to take a moment to thank Rowland and his tireless helpers. I spent quite a bit of time chatting and making new friends and while I was there I saw several people generously giving u
Hi all, I am fitting up the exhaust on my 912S and I had a couple of questions. One of the front pipes has a slip joint in it and even with the pipe fully slide in its overall length is about 10 mm l