Hi all, I have to fit a new inner tube to my monowheel. The tyre is a McCleary airtrack and I seem to recall some folks having trouble with the inner tubes pinching. I didn't do anything special fir
Hi all, I need a new inner tube to fit my 7.00 x 600 MCreary Airtrack tire. I have read in previous postings that the MCreary 700/800 inner tube won't fit the Europa rim properly. Can anyone confirm
Mike, A transponder antenna is impedance matched to the transponder and does require a matching device. The most important thing is to use high quality low loss cable and keep it short as possible. P
Hi all, After multiple tries I finally got the answers from the guy who is offering the fuel injection system. - The fuel injection full kit is $2200.00 - It does not have knock sensors but they are
Karl, I am intrigued with the idea of fuel injecting my 914 as it potentially offers the advantages improved fuel economy from correct timing, better fuel atomization and correct metering of the fuel
Hi all, I thought I would take my 914 up to 10,000 feet and run it at 100% power to see if it would do the mythical 200 mph. Here are the data I recorded. OAT 16 c 10,000' @ 29.92 North GPS 129 knots
Jan, I have one and it works well. The software allows you to calibrate it with a laptop and once I set it up I have not needed to revisit it in one year of operation. I currently have the static sid
Jim, Although I am yet to fit one, I have been told that the stall warner kit --From Europa works very well. I would suggest that you would be better off with it rather than stall strips. Paul
Hi all, The cost of hanger rent is starting to bite a bit and I am thinking of keeping mine at home on the trailer. Could someone tell me the length overall of the trailer and aircraft. Paul
Jerry, I looked long and hard at the 3 products in the marketplace, Airgator, Anywhere Map and Mountain scope. I rejected the Mountain scope based on what I saw and comments from Dave Anderson who ha
Hi all, Has anyone prepared a formal check list that they work through for their annual condition inspection ? If so could you forward me a copy. Thanks, Paul
Kevin, I mounted mine in the out riggers and its worse than useless. Dave Anderson (who is no longer a member of the forum) mounted his in the cowl, one on each side I believe and he tells me that th
Hi all, I have a 914 and I was concerned that the overhaul cost would be high. If you use a Rotax service center, I seem to recall a number like $8000.00 for a new one and $3500.00 for an overhaul. H