Hi all, Generally most of my cross country flying is IFR, (too lazy to navigate I guess) and I find when listening to the general chatter on ATC that mis-reporting of transponders is a common dialogu
Hi All, I contacted LP Aero in Florida earlier this week asking if they would be interested in manufacturing acrylic lenses to go on the wing tips. George indicated he would be interested in setting
Hi Alex, I thought long and hard about a similar approach and ultimately decided not to put a hole in the tank. Andy at Europa advised against it because the tank has no structural fibers like fiberg
Hi All, The ISP hosting my web site has gone out of business so I will have to find a new home for it. As soon as I have the new URL I'll let you all know. Paul (363)
Hi All, Some of you folk may have noticed that my WEB site at http://pma.obtero.net has been offline for the past 3 weeks. The ISP went out of business and I have relocated the site to http://europa3
Tony, Are you trying to get the correct alignment between the flap bracket and the bracket that attaches to the wing? If so I made up a spacer out of some 6mm aluminum. It does a much nicer job than
Hi all, I am about to drag my XS wings down to the basement to fill and sand. I was wondering --From the folk who have gone before me how much work this is. I am assuming that I only have to fill aro
Hi Roger, Thanks for your tips, I wish I could say "I can hardly wait". What does 3 weeks solid work translate into for hours ? Was this 3 weekends and quite a few week nights, or did you mean 21 man
Hi Miles, I purchased a HVLP gun with 1.6 & 2 MM nozzles. So far I have only used for smooth prime and it has worked very nicely. I have had no experience using it with other paint types yet. Regards
Hi all, Any suggestions on where I can buy dry transfer lettering in the US. I seem to recollect being able to buy a product called Chartpack when I lived in Oz, but I haven't been able to find any h
Hi all, This is a little off topic, but I thought I would throw it out to the group. In an attempt to reduce the night time power load on my Europa I am going to try and use high intensity LED's as m
Mike, Thanks for the tip. Did you spay it with clear varnish after? If so what sort, is it durable ? Thanks, Paul polishing that href="http://mail.cswebmail.com/jump/http://www.lumileds.com">http://w
Hi all, I found that the plastic construction of the tip to be pretty flimsy (mine broke). I was wondering if there wasn't any reason why it could be made of metal? Paul
Hi Curtis, Take a look at http://europa363.versadev.com/jan-01.html, it might give you some ideas on how to fit up your gascolator. If you wish to do away with the rubber hoses you can purchase some