Yes, I have. I've spent the evening trying to work out how it works on the standard Ducati Regulator of the 912. Can anyone share the secret? My googling comes up blank. Obviously, it's something to
Hi Will, I just went through this exercise. I settled on the Kannad 406. It's not the cheapest but the reliability data won me over. With the whip antenna you can install it within the fuzz so there'
Just to throw my thoughts on the ELT/PLB argument, as I have been debating for a while on whether to get one. This information came from a VERY reliable source, someone who is involved in the SAR ind
Hi All, On the Classic, the M10 bolts that hold the engine to the engine mounting frame. The M10x55 and M10x130 in the Europa Classic Build Manual... Is there anything special about them, are they st
Hi Bud, Thanks for the reply. I have a suspect oil leak from the starter, and the engine frame is in the way of the removal. It's a simple, undo, swing the engine forward a little bit, swap the start
All, I'm based in southern Germany. Does any have have a spare set of carburettors for the 80HP 912 UL, preferably with the 158 main jet, that they could send me for a few weeks. I'm trying to elimin
Echo Willy's comments above a fantastic effort, by all involved. Also with the conditions on homebuilt aircraft flying to/transiting Belgium having been lifted, the flight from Germany was even easie
Hi All, to save me the 50 minute journey to the hangar in order to do a measurement, does anyone know the diameter of the Europa Main Wheel on the Mono? I have the 8.00-6 tyre fitted. According to th
Hi Dave, I had the same issue as you last year, about May time. I've looked who I ended up buying it from but I can't find the invoice or anything in my email nor browser history, which is strange. B
Hi All, I've got the 7.00-6 (Aircraftspruce #06-09600) on my Europa Classic. I'd like to change it as there are some radial cracks appearing in the tyre wall. Being prudent I want to change the inner
Thanks Martin, this is a good start and moves me forward, with a part number and manufacturer. I have to admit wheel tyre/tube combinations are a mystery to me and I don't fully understand them. The
Thanks All, I've dropped Wicks an email. So hopefully I'll get this resolved during business hours tomorrow and have a nice new inner tube soon :-) Read this topic online here: http://forums.matronic
Hi All, I'll post details later about my "finally ended vibration saga", when I have more time to write something informative, short and punchy. I am pleased to say the source of my vibration was fin
Hi Dave, I promised you a reply, and sorry it's taken so long. Family life has been a bit time consuming, I have imminent twins due (well not me, but my wife to be precise [Laughing] ) and the prepar
All, I read with interest the article in Europa Flyer on the "G-OMIK" event. Last year my Europa suffered a failure of an external support strut, in the hangar, while the gear was retracted. It has b
Hi Peter, Thanks for the reply, don't worry about not getting back to the PM. I fully understand what life can be like. Hope all is well with you back in Blighty. Things my end are going OK. Albeit I
Hi All, Does anyone know an alternative part number for the large O-Ring in the Classic brake caliper. I found a post on here, from Jim and Heather, from 20/05/12 which said that it appears to be a C
Good alternative part number! Does anyone happen to know which of the "economical rivet tools" on the aircraftspruce site is applicable. They have some good rivet squeezers on there, which should mak
Barry's information helped me a to getting mine registered. If it does help the TV in Germany used Barry's info as a start and did a full survey on the trailer. I think I have a copy of the TV report