Congratulations John! Being only a week ahead of you I know how you feel. I must warn you though that your cheeks will begin to hurt with all the grinning :) cheers Simon --Original Message-- [mailto
See the ad on page 15 of the latest "Loop" Aerosport are selling them for =A323.38 (ex vat I assume). There is no mention of any rotax parts on their website though. Simon --Original Message-- [mailt
Ferg, If you are refering to the bendable flap about 6" down the cooling duct and on the lefthand side (looking rearwards), It should be bent down into the airflow to direct air up and around the tur
Someone recently suggested MouseMilk oil (available from LAS) as a cure. Simon --Original Message-- [mailto:owner-europa-list-server@matronics.com] On Behalf Of Ray Stevenson Sent: 26 July 2006 08:57
Firstly congratulations on your first flight. The pump filter layout has changed over the last few years and the latest version is at http://www.europa-aircraft.biz/pdfs/xs914%20may%2006.vp.pdf pages
As others have said, you most probably bought a Skyflash strobe from Airworld. These are actually made by KUNTZLEMAN in the USA and re badged for the UK. Simon Hi all, When I was at the PFA rally in
Steve, I used some SS plate that I had lying around and had it engraved at my local shoe repair/key cutting place for 5. I know that other have used an offcut --From their firewall. Just an idea Simo
I have also had a pipe blow off. I have noticed three different types of securing nut supplied by Europa. There is the Black plastic insert. A white one and also a brass (coloured) metal one. On a re
Mine is under the baggage bay so can't really comment on that. What I can say is that wrapping the exhausts is a big no-no. It causes them to crack. It was mentioned in a factory newsletter quite a w
Sorry! Now I have engaged brain I see the error of my ways. Simon --Original Message-- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Graham
Paul, I don't know if you got to the bottom of this but I have just posted the 914 "Error Detection Chart" in the Doc's section on EuropaOwners. It might help! Simon
Hi Jos, I have fitted these to my Europa. I can confirm that the holes were not threaded on mine. As for the gap, mine were quite tight (less than 0.5mm) much the same as in pic 3 of 9 posted on Euro
Have a look at http://www.skydrive.co.uk/sd_sa_91.asp It might be what you need. Simon _____ Has anyone used one of the Aux. inputs to Grand Rapids EIS 4000 for reading the coolant temperature by a p
Hi, The Maintenance Manual is available on the Rotax website (and elsewhere). What we are looking for is the OVERHAUL manual. Simon _____ From: owner-europa-list-server@matronics.com [mailto:owner-eu
Richard, The Matco website says that Dot 5 is okay (if you have some left). Secondly, check your kit of parts. Mine all matched with the parts list but not the instructions. When I came to fit it I h
Simon Team, I have a request - All this talk of fuel flow transducers has got me thinking (a dangerous and likely to be expensive) activity :-) I feel a fuel flow meter would be very useful but I hav
Brian I submitted a mod application at the end of August for mine but I'm still waiting for a response. Simon Richard, I have recently purchased a JPI FS-450 from Mendelssohn Pilot Supplies in the UK