I'm guessing because Rotax only give you two places for CHT probes, Port front and starboard rear, Unless you want to use the spark plug seal type of course, Ivor
It very similar to the kenlowe preheater i have been using on my Landrover for the last fifteen years, Works a treat, Certainly improves battery drain and starter motor wear! http://www.kenlowe.com/p
Hi Paul Bob Harrison has been using a MT three blade constant speed propeller for the last Five years on his Jabiru 3300, Give him a call if you need more info! ptag.dev@tiscali.co.uk -- Original Mes
Hi Vaughn I have set the instrument panel on 1 inch rubber mounts for isolation purposes, And this gives 12 inches clearance to the firewall, The SL30 carrier and wiring is 11 1/2 inches, It will lea
I used a 12 inch long drill bit, once started you can make it curve slightly to miss the Tank inlet, works a treat!! The other way is to use a pancake drill attachment, they work well in confined pla
Hi Ferg Assuming that Europa give you the Andair CK321-H check valve, The measurements are 72.80mm overall including nipples, Body only is 41.40mm, the nipples are 8.20mm O/D, Diameter for the main b
Glen that is not actually the case, If one Pump became blocked, ( There are small mesh filters on the inlet) the second pump would draw its fuel around the Bi-pass pipe and Non-return valve, But i ag
Have just checked my 2005 engine and the fuel pump camshaft lobe is in place, No problem to fix mechanical back up pump, ( except for running fuel line back and forth on top of a hot engine) Ivor Phi
Steve If you have the normal Europa throttle box, the bottom fulcrum point for the throttle lever is adjustable with two nylon washers each side on a through bolt with a stiff nut, Its a tight squeez
Hi Alan These people carry them, Its German so a tad dearer than home grown, http://www.tooled-up.com/Product.asp?PID=126785&MAN=Stahlwille-Spark-Plug-Socket-Rubber-18mm-11-16in Ivor Phillips
Hi Dean Check the oil pressure relief valve is not sticking, Or the spring isn't damaged, At the same time i would change the oil and filter, I would use the genuine Rotax oil filter, Another possibi
Duncan I have a complete interior kit still in the box, Will weigh and post findings on the forum, I assume it will be a bit lighter after fitting once the off cuts are removed from the equation, But
Paul The PDF file has a list of approved Nextel sprayers, Also I believe that Matthew Russell does painting as well. http://www.mankiewicz.de/home/default.asp This is the URL for the company that now