04/24/2003 09:14:57 AM Greetings All, Rather than making a firestopped tunnel through my firewall for the various and sundry electrical signal wires, I was hoping to use a mile spec C5015 subtype K c
04/24/2003 03:31:00 PM Hi Guys, Thanks for responding!!! I admit I did not consider using Series 1 from AMP since they are thermoplastic and while great else where in the airframe (and I am using two
05/05/2003 07:14:14 PM This is most likely a glitch in your name server. Ira To: "EUROPALIST" <europa-list@matronics.com> cc: bcc: Subject: Europa-List: Refused Europa Factory messages "Fergus Kyle"
05/19/2003 09:54:19 AM Greetings All, I have been searching for information about deploying EGT sensors on a 912S for the past week and have found nothing useful on the web, on the on-line Rotax manu
05/21/2003 09:55:56 AM, Serialize complete at 05/21/2003 09:55:56 AM Per the 912ULS Rotax Operators manual on-line at Kodiaksb, The max T/O EGT (5 minutes) is 880C The max Cruise EGT is 850C If indee
05/26/2003 07:10:10 PM Hi Ron, The main thing I know of is to do the dive brake control install while the cockpit module out of the fuse. If you wait til you are done, you will be squeezed for space
06/01/2003 08:05:16 AM Greetings All, I recently enjoyed reading Ken Paser's "Economy with Speed". It is essentially a study of the effects of applying 30-70 year old known aeronautical design best p
06/03/2003 05:42:22 PM Hi Joe! Looks like the new paint shop is going to pan out, so to speak. Tailplanes already filled, sanded, blocked and primed. My fuse should be ready to go over there in about
06/23/2003 09:50:54 AM Yes super bright LEDs are available, too bright for me to look at when on with 15 ma, but they do get brighter still with pulsing. I don't think 10 kHz is going to interfere wi
06/23/2003 06:39:02 PM All that you say is true under those circumstances. Another approach might be: no more than 2 leds in series since if one goes, they all stay dark I put bypass caps on anything
06/24/2003 03:20:26 PM, Serialize complete at 06/24/2003 03:20:26 PM Hi Jos, Just a second here :-) You mean to say that 0.01mfd ceramic caps are going to load down the pwm? whoaaaaaa! You mean to se
06/25/2003 10:24:52 AM, Serialize complete at 06/25/2003 10:24:52 AM Who knows what is in that box? The Rotax regulator box is apparently an Austrian state secret, no even Bob Nuckoll's has been priv
07/16/2003 08:17:24 AM, Serialize complete at 07/16/2003 08:17:24 AM I used a 30 amp fusible link (ala automobile) as recommended by Bob Nuckolls (Professor Aeroelectric) Cheers, Ira N224XS (in paint
07/21/2003 07:21:28 AM Speaking from no direct experience, I think a ground sensor is a reasonable and inexpensive gizmo. I would however be fairly surprised if the (typically) 40kHz sonar system wor
09/02/2003 12:27:42 PM, Serialize complete at 09/02/2003 12:27:42 PM - Has anyone seen a MSFS model of the Europa? Don't know that I'd bother, the MSFS flight models tend to be very inaccurate. There
09/02/2003 01:13:23 PM, Serialize complete at 09/02/2003 01:13:23 PM I have recently purchased the new Garmin 3600 that works using an integrated Palm PDA. It appears to be an excellent EFIS/GPS inex
09/02/2003 03:23:56 PM, Serialize complete at 09/02/2003 03:23:56 PM I totally agree with your figures. I tested my mono XS with Airmaster Prop engine at idle and 70kts. I decided that 2nm/1000' was
09/04/2003 01:28:23 PM, Serialize complete at 09/04/2003 01:28:23 PM The Matco parking brake valve is in the Spruce catalog at $98. I just bought one today. Iwas going to mount it on the firewall und