Hello all, Uploaded a quick video of flying with my Uncle in N111EU. As many of you know this Europa was the first flying in the US. https://www.youtube.com/watch?v=2KllVx3Te70 -- Kyle Europa Tri-gea
I too have been in the process of changing from a mono wheel to a tri gear. I have images of the process on europaowners.org under "Kyles Europa." I'm located in Alabama if you're nearby. Bob's image
This what your looking for? Never been used, took it off my mono conversion. I have the full swing arm. -- Kyle Europa Tri-gear (under construction) Read this topic online here: http://forums.matroni
With advice from my Uncle, Kim Prout, I threw those right in the trash. I purchased some air vents from Vans Aircraft. If your going to fly anywhere hot, like southern California or Alabama, then the
Hello all, I received a 3D printer for Christmas and wanted to try and create parts with it. I was in the process of cutting the relief out of B16 for the brakes and wanted to test it on a model befo
My Uncle has been working on this issue for years with different mods. This is the current setup and works very well in the heat of Southern California. I can forward you his email if you are interes
I'm hope everyone is doing well. I have taken too long of a vacation from building and going to get back into it. Last I left off I was getting the finger brakes ready. Since my kit is a mono wheel c
Hello Bud, I'm excited to go over your PDF. I have all that I need to install the Matco brakes --From Europa, just not the moldings. I have to create a mono wheel cover, this might be a better soluti
Kingsley, The fist mod was the oil cooler moved to its own inlet below the spinner. There have been many mods after. In this link, the first 7 photos, you will see the current cowling mod of my Uncle
Hello Pete, The engine is a 912UL. You are correct on the cowling spacers. The lower lip was dropped a bit to allow air to exit. However, I'm not sure the spacers are still there with the new mod due
Hello Chris, Based on what I could find on the size of the old filter this one came up with a dimension search on K&N. 33-5000 https://www.knfilters.com/33-5000-replacement-air-filter I used walmarts
Was watching Mike Patey videos on Draco and saw where he is using ultrasonic sensors to let him know when he is running on just the leg tanks. I was thinking about some way to use this in the Europa
I hope to be able to fly my teenagers around before they move out. I was fabricating the oil bracket for the 912. -- Kyle Europa Tri-gear (under construction) Read this topic online here: http://foru
Hello Paul, Well I recently closed in my mono hole and followed instructions that Bud posted (or emailed me, can't remember). I started by doing 3 layers of bi-direction cloth on a glass table and us
Hello all, About to run the brake lines and wanted to see what opinions are out there for the way to run the lines from the parking brake to the wheels. The manual says to run them down the center th
Hello Kalv, That is some beautiful work! That's pretty much what I was thinking about. I like the conduit sleeve you used. Is that like squished pvc? /Kyle -- Kyle Europa Tri-gear (under construction
Hello all, I'm getting to the stage to hang the engine, to mate the ring mount to the Europa engine mount. I found the M10x110 on Lockwoods site but I cannot find the 'Binx' nuts anywhere other than
Hello, I'm wondering what hardware is used to hold the choke cable to the carburetor choke lever. In the Rotax parts for the carb, it doesn't show the part I'm referring to. Below are a couple of im