Scott Thank you for bring this to my attention. I have been waiting 3 months for an MGL FF1 with the FT60 sensors. I e-mailed the UK agent yesterday to ask again about progress. On my last enquiry (a
Martin & Paul. Due to the developments that I have been involved with I have many 2D drawings of the Europa all in AutoCad (DWG) which I can easily provide as DXF (but then the files are much larger)
Peter You will find all the Mods at http://www.europa-aircraft.biz/updates/. Then pick the "Modifications" tab and look down the list for Mod 65. This will give you the instructions for the first ver
Erich Here is a copy of a note from Bob Berube and one from Bud Kim Prout and I (Bud) have a US manufacturer that will refill the struts. We need 45 lbs normally as we are now using a thicker window
My experience, while developing and testing the Autopilot mods (75 & 76) for Europa, was mostly with the TruTrak digital servos. They and all the others I have seen, behave as Franz describes. This i
Graeme There are two LAA standard Mod to fit an oil thermostat to a 912. You will find this under Rotax 9xx mods rather than under Europa. SM12808 is a little more expensive. Let me know if you have
Rob I have attached a copy of Mod 71 issue 3 for information. The radius of the upper hook should be 38mm to fit the frame tube ( the lower is 32mm). I am not aware of any batch of springs which have
Rob At this moment I am the only source of issue 3. At Europa's request (David Goddard said he was too busy) I had it approved by the LAA. I have passed the factory the master copy but as yet they ha
Bud After I replied to the e-mail last night, I realised that Mod 71 issue 3 is, in fact, sitting on Andy Draper's desk at the LAA. Andy has had it since May but, despite chasing, has yet to come bac
Rob Thanks for the drawing. The Dynon servo (as are a number of others) is mechanically identical to the TruTrak but has it's own electrical interface. The revised mods makes only minor changes/corre
Bud Copy of Mod 75/3 attached to today=92s e-mail to Rob. Copy of Mod 71/3 with my Sunday e-mail. Copy of Mod 76/3 attached here. If you cannot find them let me know and I will send direct to you. I
Goff As I told Peter on the phone, Terry has the tank from G-IRON available. It is undamaged but as yet I have not cut it out of the airframe. Ian Rickard G-IANI XS Trigear, 300hours Europa Club Mods
Andrew If your CS10 is dark brown/black then it will not have been plated. The steel components were shipped with this oil finish up to about 2002/3 when Europa started plating them (the gold finish)
John Mine are a pair of aluminium handle from Homebase with one end cut off. Just look for something you like and can modify. Ian Rickard G-IANI XS Trigear, 300hours Europa Club Mods Specialist e-mai
Europa are now offering the hoses developed by Stefan Ingemarsson SE-XRX Contact Stefan for details E-Mail : ingemarsson.s@telia.com Tel/Fax : +46 (0)511 80160, Mobile : +46 (0)70 3780160 To give you
Europa are now offering the hoses developed by- Stefan Ingemarsson-SE-XRX See picture attached. Contact Stefan for details E-Mail : ingemarsson.s@telia.com Tel/Fax : +46 (0)511 80160, Mobile : +46 (0
Greame, Richard I do not know who was advising from the LAA regarding wingtip strobes but I think the point has been missed. Essentially the LAA is not interested in your strobes. What is of concern
All I E-mailed Matt again this week describing the problem asking him to delete the Morgans. So far no reply Ian Rickard G-IANI XS Trigear, 300hours Europa Club Mods Specialist e-mail g-iani@ntlworld