night I=99m stunned to hear this news. While I may be a continent and an ocean away from the UK, I=99ve always felt a kinship with him as we shared our deviations from the stock Europa-build and he
With my Beringer I particularly like having mounted it low on the pilot =99s control column which allows left hand breaking with right hand on throt tle Sent from my iPhone ringer one, largely to sav
Willyeshere are my sketches and a couple of pixsassembly tested to 10 G=99slet me know if you would like more infoBest, Fred of the harness? I can find the posts but not the the design/pics on the fo
WillI did have my initial flight back on Nov. 1, =9919; however, it was a short one due to engine overheating. I had fallen in love with my tuned exhaust which placed a lengthy serpentine of exhaust
In addition to concealing wires heading aft, I wanted to stiffen the door sill; I used a quarter round section cut from plastic pipe as a mold using 3 layers of BIDfore and aft of the sill, I used a
NACA vent in vertical fin leads to adjustable overhead outletsfee ds thru overhead plenum...very effective; one can feel the fresh air at the outlet even during engine idlekudos for idea from Jeff Be
I believe that the stall warner mod has a profile of the forward most 6 of the wing profileFred the information being sought... Specifically searching for actual airfoil profiles employed on the Euro
Petebelow are my best efforts in that regardI too am very curious as to what a rigorous analysis will show...Fred looks like! ;-) OpenFoam <http://forums.matronics.com/viewtopic.php?p=502194#502194>
PhilWhile I recognize you as a highly experienced Europa builder, I pass along two modifications to the stock Europa tailwheel which have been recommended to me by others. First, add a stop to preven
Just to add one more bitI=99m 6=99-1=9D, and my seat cushions are made up of 25mm green foam, 25mm blue foam, plus triangular wedges of furniture foam for thigh supportsI find the wedges to enhance c
Thanks BudMy concern about replacement stems from an apparent brake fluid leakdidn=99t realize there was a potential =9CO=9D ring failurealways hate to snip my elegant safety wiringFred just aluminum
Gents, Thanks so much for responses to my concerns about my leaking brake on the mono wheel. Special thanks to Ron P for the link to the how to youtube which revealed what had previously been a myste
In our discussion of ensuring that the rear shoot bolts are in their proper location, I=99ve been struck by the comments about checking by nudging with the pilot=99s left elbow to =9Cfeel=9D whether
I supplement my previously described install of microswitched LEDs with a placard on each door frame along side the lever stating: DOOR RELEASE - DO NOT OPEN IN FLIGHT UNLESS YOU ARE LEAVING
Timthanks for posting about your recent touring in NZthough Im unfamiliar with the cited landmarks, your narrative is very evocative. A few years back as I recall, I intercepted a tailwheel fairing w
Syncing a GoPro 10 to my iPhone13enthralled by youtube instructional videosan amazing little camerafabricating nonintrusive attach points @ top of vertical fin, top & bottom of port wingtip, plus som