One answer here might be to use the foam that is used for custom, very-close-fit seats - e.g. in Formula 1 cars? When we did the supersonic car record, the seat used this technology. The 'bag' was fi
How are you measuring that, Paul? ASI, GPS corrected for wind, track/time corrected for wind? Regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Europa Club Vice-Chairman, Webmaster, PFA NC Re
Guys and Gals - please read the instructions! :-) Hi Rowland My address is: Thomas Friedland 7950 Bella Vista Road Atascadero, CA, USA 93422 -- Original Message -- From: "Rowland Carson" <rowil@clara
Having fitted my Singleton tailwheel bellcrank, I=92m now looking at how to arrange the autopilot pitch servo =96 so I rigged up the flap drive tube and some string for the rudder cables. The rudder
Brian, Have you checked with Andy Draper? He can advise if your solution gives rise to a strength issue. Regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Europa Club Vice-Chairman, Webmaster
I just wanted to thank everyone who has helped with this problem. It's good to know it's so easily fixed - and while it's comforting to know I'm not the only one to experience it, perhaps that isnt s
No panic on having to take yours out. Mine needs two lugs adding to it for the pitch servo of the autopilot. Any tips on getting the bugger out as easily as possible? I imagine I need to remove: 1)
Thanks, Tim! Did the arms to the roll torque-tubes have to come off, too? Regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Europa Club Vice-Chairman, Webmaster, PFA NC Representative PFA EC
Bob and Tim, Thanks for that advice from you both. Looks like this will be easier than I'd feared :-) Not removing the roll arms is a big relief! And I know my tank guards will come off no problem. I
Hi, Europaphiles, The PFA (the UK equivalent of the EAA) are engaged in a considerable amount of political lobbying at present, and our man leading this (Roger Hopkinson) needs some information from
Dave, Are you a member of the Europa Club? The Club has a mod for exactly this - I based my mod for installation of a TruTrack AP on it. Regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Euro
Just a quick one =96 does anyone out there know anything about an N-registered Europa visiting the UK presently? Kind regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Europa Club Vice-Chairm
Gerry, Although no official details are available yet, it is believed to have been a 2-seat homebuilt - I must emphasise that this is not yet confirmed. My sympathies go out to the families of those
Thanks, Nev! In defence of Turweston, they're prioritising work that keeps planes in the air or gets them there in the first place - so I suspect that's the reason things aren't moving quickly: he's
Mike, I just knew someone would accuse me of 'going native' when I sent that! No way, my friend!! The pressure is still on Engineering to deliver - and in fairness to them, they are currently doing j
Hi, Paul, Quite simply because the ICAO rules on flying a foreign-registered plane only apply to Certified ships. N-reg Experimental ships are allowed here on a case-by-case basis for short periods -
Dear Mr. Hat-Trick, There's a trailer regularly advertised in the Gloster Strut newsletter: For Hire Recently overhauled 20' x 6' twin axle flatbed trailer, suitable for transporting aircraft. 25 per
I heard they were fuel-injected, twin-turbo, intercooled. Probably not a lot in common with the version we buy other than a few bolts and the odd cover! Regards, Jeremy Jeremy Davey Europa Monowheel
HI, Europa friends, Cliff and Betty Shaw of Wile E. Coyote/N229WC fame will be over in the UK in June and will be stopping with me for a few nights (at this stage 22nd and 23rd look likely). It would
Guys, A quick one for those who have been there, done that=85 Can anyone give me the approximate clearance between the lowest point in the vee of the flap drive cross tube FL15 and the fuselage floor