Gosh, Jeremy, I guess my Creative Air nav lights didn't know that they could not fit Graham's lenses so they just did fit themselves! Tom Just a quick word of warning... The CreativAir nav lights wit
Paul I believe that Bob Jacobson test flew his own with little or no experience in monowheels. Tom@whoislikelytotestflyhismonoalso.com Hi All; I have a question that I hope some of you don't mind giv
Michael I don't understand. I have an Airmaster CS. Yes, it does fully feather. I don't have my invoice in hand but I recall that it was about $4,000 usd delivered. with the spinner and controller. I
Hi Rowland My address is: Thomas Friedland 7950 Bella Vista Road Atascadero, CA, USA 93422 -- Original Message -- From: "Rowland Carson" <rowil@clara.net> Subject: Europa-List: Europa Club newsletter
Yep, a healthy burst of 4 letter words and a little WD-40 or teflon spray helps. Tom Hi All, I am trying to fit some 2" SCAT tubing to one of those 2" flanges sold by AC Spruce. I can't get the darn
Hi Paul No reply from Bob. If he received the email he, unlike Kim, would not fail to respond. Soo, either he didn't get it, is traveling, or is thinking about it... Have you read Faa AC 90-89A? 99 p
Folks, a word of caution when dealing with XCOM. I ordered their intercom and a harness to switch between two Microair 760's. The harness was junk and did not work. Michael would go months and months
HI Dave I found that if I made the mix quite dry it sanded better. Also overnight was not good enough but waiting until the following day made the sanding much better. Tom Friedland Just started fill
I don't remember the exact size of the ground plane but it is pretty small. 4 to 6 inch diam. If someone doesn't have the correct size, I can find it. I someone needs the ferrite doughnuts, I can fin
Hi Ron I did not bond the cover in place but mounted it with countersunk screws. I have already found a need to open it up. Another thing I did was bond a few layers of carbon fiber inside the base
Hi Peter Count me in for a board. Is anyone ordering the components as a package? If not, I can get them from Mouser or Digikey and send a package to those who want them. Please do the upgrade as you
Steve I think the paint scheme designer program is likely: http://www.schemedesigners.com/ Tom Designed mine using a scanner and drawing program. Corel Draw would be fine, though I used my sign makin
When is G-OBJT going to fly? Kit 055 Classic Trigear G-OBJT finally took to the air between heavy showers at Old Sarum on Friday 3rd June at 1805 BST. Test pilot David Scouller made this, his first E
Hi George I have about 30 to 40 1/8" clecos and a dozen 3/16". I found them very useful in putting the top on, the rudder post in, fitting the rudder, trim tabs, ailerons, plexi in the windows, the p
Hi Ira I think I have one in California... Tom Mono/XS/Jab/Airmaster N96V Greetings All, Does anyone in the NE US have an Airmaster C-Spanner prop blade ferrule wrench that I can borrow for a day? I'
Hi Paul I kinda wondered if this is what you wanted. My XS with a Jabiru and Airmaster w/spinner is 21 feet, 3 inches from the tip of the trailer tongue to the tip of the spinner. That plus a little
Hi John 140's are great. I bought one in '59 for $800. (It hadn't flown for 3 years and the engine leaked oil from every seam. I sent away for an o-ring and seal kit and over a weekend took the jugs
Hi Craig The same thing happened to me. Fortunately John Hurst was still in biz and he sent me a bill of sale. I bet Andy in UK will do the same. Tom Friedland, Atascadero, CA, N96V, A079, mono, jab,
Hi Paul I am using the cheapest quick drying flat black enamel. Seems to work well. Tom Friedland Anyone who has used a black (or other colour) spray to help contouring while sanding - can I ask what
Hi Ron I have different LED position lights. They are very bright. (Much brighter than my old reflector bulbs and they don't even get warm.) Then I have 55 watt 12v lights on each side for landing/al