project so far. Having disconnected the TCU and wastegate servo to mount them aft of the firewall, the manual very succinctly tells me to make holes as small as possible and use a suitable method of
-- Original Message -- From: "Fred R. Klein" <fklein@orcasonline.com> Subject: Europa-List: metric drill bits Hi to All who have gone before me, I make note of the list of metric drill bits on Pg. 1-
I agree with Michael Parkin entirely. I too used extra AS peelply which was invisible when wetted and feel that RTFQ should be included in every kindergarten manual. Before lambasting the factory fol
Well, when you get down to it, a quarterwave whip above a quarterwave radius ground cone is really much like a halfwave dipole, only less directive. the cone gives it 50ohm nominal impedance but they
Hi, I've been searching for AN parts to serve the following need: Attach urethane 1/4"ID plastic fuel line to 3/8" aluminum fuel line fittings - (for the purpose of directing tank bottom drains to SA
Cheers, I realise this may be a long shot, but I have built both the "egg-crate" cradle from (I think) Pops Popenoe and the rolling cradle which I understand originated with Europa. Each has its qual
Cheers, Bob Nuckolls will kill me, but I found the title items really useful and quick to route 1/2" irrigation tubing as conduit. For the price I wouldn't hesitate and they are rare devices. "Subjec
Just wait until the close before you regret. Usually those bids go up with a vengeance at the very end. Dave A227 Mini U2 I concur. The local ham radio club just had a demo, and the item sold showed
it was after Cheers, I had trouble with the Europa filler, until I coated (ever so lightly) the required area with the finest touch of epoxy to 'dampen' it. Waited a few minutes and the filler stuck
Dave, What engine? It may be that cold oil slows the output until it reaches the heating area and then once through, resumes normal readings. this is true for every engine in which Start is not prece
This is only me speaking - Andy or neville may wish to comment. I was at the Europa tent the last two OSHes, and watched or took part in several wing attachment parties. The speed and accuracy of the
There you go............ Jim Weir in the latest (must be DEC03) issue, tried out an AOL CD-ROM disc as a groundplane for his GPS, on his hightech garbage-can antenna test range, and found a barely me
the builders would Tony, Just roughly, would a number of the last chapter generally completed be enough? (might need two lists for classic and XS) Another ploy might be the stage completed as shown
BUT - you girls are going to have to get your house in order! First it's Sherbourne then it's Sherburn then it's int' 'elmet. There are going to be Europas all over the place. have a heart for a fell
Permission from the other half to go out to play with the boys and/girls. As distinct from the 'Goolie chit' which refers to something else entirely. Mike
Mike, Your latest doesn't mention epoxy make, but suppose you are not an Aeropoxy type like me - although the recipe difference doesn't matter that much. Mine specifies no greater error than 1% which
Cheers: "I used the drawings from the Europa Flight Manual and blew them up on a photocopier. I suspect they were printed from a CAD program as they Seem to be perfectly to scale and they show all pr
--From the >group. the left, do right? There IS a difference between an elevator and a stabilator. The first changes the shape of the control surface, such that a down elevator curves the elevator/s