Hi Bob / All. The blue foam is pretty well closed cell, the type that is definately closed cell is coloured orange, and sold as ''Flotation Billet'' as opposed to ''Insulation Billet of the blue, as
Hi Jos, Do you have the engine installed yet? With the weight of the engine, the suspension is compressed, and the swinging arm will be captured by the ramp. The rod ends on the ramp tie rods can be
Steve, Ask for 3M or Fascal vinyl, most of the other makes will fade in a very short time, these two brands are colour fast for 8 years, guaranteed. Cheers, Nev.
Which do you put in first in a tri gear? The legs or the compression strut between the rear of the wings (W36 tie bar assembly)? Hi Will, Get the leg socket in, with rib 1 bonded in, then ''dry fit''
William imho its the legs, and its a tension strut btw. At very high angles of attack the load pulls the wings forward. I found that hard to believe too but it's true. It was first realized when an e
Hi Alan, Yes, the newer flap drive motors are much slower in operation, the supply of the original ones dried up when the manufacturer discovered where they were ending up..... a few were purchased c
the g... Attn Kingsley, I sent you an email last week after your request for me to contact you, had no reply from you, perhaps my aol [ another one lost ? ] system is stopping them getting through ?
Ramio, Ensure the spherical bearing is driven fully into the tube end fitting, if it is not all the way in, it will rotate as you have described, when fully inserted, the rotation should be limited s
Jos I think you hit the nail on the head! G Hey Guy's, that is what I said three days ago............................................................ Cheers, Nev.
I have been most interested in this product. The Aeropoxy rep at Sun N Fun had told me the it was under testing by Europa as a replacement adhesive a few years back. I talked with Andy a year later,
Hi Keith, There was a batch of brake lines sent out by Europa [ the '' old '' Europa ] that were too short, guess you must have one of those ? Get EO4 to supply you with a length to suit, tell them i
Hey Jos, you Finnish ? ! Today, at the hands of Ivan Shaw the Northernmost built and based Europa XS kit 600 OH-XJO took the air. It flies great, ball in the middle, no hands on the controls, no tabs
Roger has to be diplomatic, I do not ! If gobby di**heads like Richard Holder are so upset with either the Europa plane itself, or the E04 operation, can he do us all a favour and sell?his Europa to?
Hi Ferg, Try a vacuum cleaner with some plastic tube on it to suck the plug out ? Cheers, Nev. Jeremy I thought of that but if the Redux managed to touch the circumference on its long and tortuous vo
Hi Juergen, Re routing the return line in this way is negating the main reason to have it in the first place. The main reason for the return line is to purge vapour and hot fuel trapped in the lines
With no tube, and only 18psi in the tyre, I would be concerned the tyre mig ht pop the bead if presented with any sort of side load.................... ... just being the Devil's advocate.......... F
Hi Alan, It's a pity you were not available when we were working on the design and m anufacturing process all those years ago, we could have done with an expert to help. Sorting out all of the thousa