Hi Fred, I have the Dynon transponder installed with RG58 coax. I wasn't too exc ited about having to replace the coax so I thought I would give it a try with the existing RG59 cable. While I can't s
Hello all, Thanks for the kind words on my Skyview installation. I will see about uploading additional photos and pertinent info on the convers ion to my album hosted on the EuropaOwners website. Reg
Hi Jim & Heather, Please add me to the list of those attending S&F. I w ill be arriving via airline into Tampa on Monday evening and departing T hursday evening. Looking forward to seeing everyone. C
Hi Fred, I keep a small Mr. Funnel in the plane for fueling while travel ing cross-country, and a large in the hangar for routine filling at home base. There is a noticeable difference in speed of fi
Hi all, Wish I could join you all at McMinnville. I will be traveling to Vancouv er, BC that Sunday on business will probably overfly the airport while sitting in coach. Anyway, I fle w to McMinnvill
Bill, Just went through this exercise. I was able to find the Rotax sen sor, just not willing to spend $150 + for what should be a $25 part. I ended up purchasing VDO 323-801-010-003K which is thread
Hello Frank, You might give Skybolt.com a try. They have the requested part number in stock (flush slotted head) as well as the flush Philips h ead versions both in stainless steel. See link below: h
Hello Fred, While a can't speak to Aero-Thane topcoat specifically, I do have experience with two-part polyurethane. I would recommend for thos e areas with less than desirable gloss you might try we
Hi Carl, Nice installation! Looks like you have all the bells and whistles. Enjoy. Erich Trombley Classic Mono 914 ____________________________________________________________ Affordable Wireless Pla
Hi Bud, Sorry to hear of your starter problem. I took an early flight t his morning in preparation for OSH. I had made a couple of modifications that I wanted to prove out. I must admit I didn't slee
Hi Will, You didn't mention which mounting mast you using, only that you have the Dynon Pitot. Which mast you have will determine options. Eric h Trombley914 Mono Classic William wrote "I did not res
Hello all, Does anyone have any experience with powder coating their Tailwheel Spring? Is there a concern about the oven temp necessary to melt the powder and the potential affect on the temper of th
Good day, Thanks to everyone for your responses on powder coating. I al so received a response suggesting nickel plating instead of powder coati ng. This would be my preferred choice if flexing of th
I am trying to reach Howard Brooks. Howard if you are still monitoring the forum please contact me at: erichdtrombley@juno.com Regards,ErichN28 Classic Mono 914 ______________________________________
Hi Martin, I installed the 10 inch Dynon in my mono. ____________________________________________________________ Avoid Botox: How To Remove Lip Lines & Wrinkles In 2 Minutes Fit Mom Daily http://thi
Hi David, I did just that. I have a 914 installed with XS engine mount in my monowheel classic with a modified classic cowl. I chose to cut of f the nose of the cowl and extend it to accommodate the
I used a grey "hammered" finish from a spray can. I like the look of the "hammered" finish as it gives the panel some depth. Like others have said, sand the gel coat prior to priming and application
Bud, Wow! What an experience. Glad to hear you are on the road to recovery and that Ira is in your court. Hopefully it won't be too long before you are back in the air. Blue skies, Erich ____________
Congratulations William! Where are you based? Erich N28ET Classic Monowheel ____________________________________________________________ Police Urge Americans to Carry This With Them at All Times The
Hello, Sorry for the delayed response, however, it seems I haven=99t been receiving the Europa List Digest. Thought I would check the Matronics site and sure enough I missed the last week or so of em