Mine did the same thing. I couldn't figure out why it changed as it cured.
It was easy to weight it back to 1.4 degrees and do the upper surface.
Tom Friedland
On 2/14/06, Flying Farmer <funnyphone@btinternet.com> wrote:
>
> funnyphone@btinternet.com>
>
> Advice Needed
> I just want to check something, before I get it wrong. Im setting
> up the Flaps for the second skin lay-up, Top surface. When I did the first
> surface, Bottom skin, I set the washout to 1.4o as described in the
> manual, as I have a digital level it makes this operation easy. Now setting
> up the Flaps for the top skin, Im checking the washout again, as before; I
> find there is a large variation. My level is reading 2.2o, so my question
> is, Should I still set this up for the washout as 1.4o? My own answer is
> it should be set to 1.4o. But I would like some advice from those who have
> been here before. Also any other tips.
>
> Thank You.
> ----------------
>
>
|