>I wonder if anyone has any tips on fitting the transparent bits. I have opted
>for the clear rather than smoked plastic, and would like to know what I can
>protect the surfaces with, I have been told cling film reacts and I do not
>like masking tape left on for any length of time. Is there something I can
>put on in liquid form. Also are there any reasons not to drill the plastic to
>accept clecos , for securing during setting.
>
>Roger Lloyd uk6
Yet to do this bit, but I've done a bit of research. A friend used clecos
to great effect. Regarding protection, I have seen that water based white
wood glue (I forget its name) used. Water it down and paint it on. It will
stop all sorts of nasties from getting to the screen. In addition, you can
peel it off when finished.
Hope this helps.
John Bampfylde, #130
|