- 1. XS Trigear (score: 1)
- Author: Steve Pitt <stevenwpitt@cwcom.net>
- Date: Tue, 27 Mar 2001 07:07:23
- A couple of questions for the group 1) Rudder cables under the intermediate bulkhead ('D' shape) - do they go inboard or outboard of the plywood supports? 2) Tailplane mass balance weights - how much
- /europa_forum//html/europa-list/2001-03/msg00263.html (7,170 bytes)
- 2. RE: XS Trigear (score: 1)
- Author: Bob.Harrison <ptag.dev@ukonline.co.uk>
- Date: Tue, 27 Mar 2001 14:37:31
- Hi! Steve 1)INBOARD. 2)About 1/4" by hacksaw. (after fill and full paint job) Perhaps better done by drilling holes to finish like a swiss cheese, since then you can put a bit of lead back in if you
- /europa_forum//html/europa-list/2001-03/msg00266.html (7,512 bytes)
- 3. Re: XS Trigear (score: 1)
- Author: DaveBuzz@aol.com
- Date: Tue, 27 Mar 2001 09:23:00
- Steve: <<1) Rudder cables under theintermediate bulkhead ('D' shape) - do they go inboard or outboard of the plywood supports? >> Line them up with whatever end fitting you are using. eg t/plane bulk
- /europa_forum//html/europa-list/2001-03/msg00268.html (7,574 bytes)
- 4. Re: XS Trigear (score: 1)
- Author: Fred Fillinger <fillinger@ameritech.net>
- Date: Tue, 27 Mar 2001 18:09:03
- Likely more metal than will be easy to do crawling around back there, after painting, with a portable drill. Rather than a roll pin, I added a short piece of tubing that fits over the mass balance a
- /europa_forum//html/europa-list/2001-03/msg00269.html (7,509 bytes)
- 5. Re: XS Trigear (score: 1)
- Author: Tom & Cathy Friedland <tfriedland@home.com>
- Date: Tue, 27 Mar 2001 16:43:40
- I had a friend slice one third of the weight into several different thicknesses. Then when the time comes to balance, I can select the ones that will make up the right amount of lead. Tom N96V XS Mon
- /europa_forum//html/europa-list/2001-03/msg00270.html (7,868 bytes)
- 6. Re: XS Trigear (score: 1)
- Author: Dr. Christoph Both <christoph.both@acadiau.ca>
- Date: Wed, 28 Mar 2001 12:42:18
- Lead? I would use large fender washers. Christoph Both #223 Wolfville, Nova Scotia, Canada I had a friend slice one third of the weight into several different thicknesses. Then when the time comes to
- /europa_forum//html/europa-list/2001-03/msg00275.html (8,153 bytes)
This search system is powered by
Namazu