Hi I think both David and Graham have made the right conclusions. The key thing is to make the gear lever as stiff as possible and no play when it is in gear-down locked position. One way to make the
Hi Martin Me and many other 912/914 users have used Morgan CarbTune ( 2-column system ) http://www.carbtune.com/ with great success. CarbTune has a stable reading and the two columns are close to eac
Hi All I had the same problem a year ago. The socket was totally deformed. I bought a new one from Europa. Not expensive. The new one was of much better quality. (Completely different) John, at Europ
Hi Ron, This is how I made the power supplies mounting: 1. Mark where the opening will be http://scassel.se/europa/cap3/images4/DSCN1033.JPG 2. Prepare the flange for the panel. (3 layers of bid) htt
Hi I have read the thread with great interest and I think I need to add some facts. Some already stated by Jos and Frans. I have used WoodComp SR2000 for three years with 100% success so far. Also ve
Hi Troy, Another approach is the "mini dolly": http://www.scassel.se/europa/dolly1.jpg http://www.scassel.se/europa/dolly2.jpg (aircraft level) The dolly is attached on one of the strongest part of t
Barry and all,I aggree!Last month I ordered some spare parts to my mono.Two days later parts were delivered, by DHL, at my office in Norway.Fiona, at Europa, is a very serviced minded person.RegardsS
Hi Hans Jrgen, Should be: Pics and details at http://lnhjd.scassel.se/ (LNHJD) I.e LIMA-NOVEMBER.... Not INDIA-NOVEMBER.... Regards Stephan LN-STE (hosting Hans Jrgen's pictures)
Hi Ted, Yes you can ! With right training and approach there is no problem. Before I took my first flight in my Europa Mono I had at least 150 takeoff/landings with Cub. Numbers of hours on a trail d
Hi, I am very pleased with my SR2000 approaching 300 hours. I have one failure though. The company (Jiri) is very supportive. I ordered spare parts in order to repair the gear box. Within 3 days the
Hi Raimo, Very happy that everything vent ok. Your story sounds very familiar: Two years ago I had a serious prop failure with my WoodComp SR2000. One blade stopped due traverse drive failure. This b
Hi Europa Flyers and builders, The Aero 2012 Friedrichshafen Europa Gathering is the subject. You will find more information here: http://aero2012.scassel.se It would be smashing if Europa flyers fro
Dear Ian, That would be fantastic if you and G-CBHI will participate. Please make that happened So far there are about 10 Europas and 14 persons that have announced there interest. And many more to c
Dear Europa flyers and builders, Europa Flyer's Tour to AERO 2012 Friedrichshafen: http://aero2012.scassel.se/ Until now there are 14 Europas, 18 pilots/co-pilots having confirmed/expressed interest
Hi Nev, I did a =9C5-years-service=9D this winter and replaced all rubber parts: fuel, oil, water hoses, etc My engine, 912S, has used Evans from the very first day and it approaching 400 hour. No si
Hi Fred I have used 700x6 (Air-Trac) for nearly 6 years and I am very happy. It sits perfect in the swing arm. After 6 years and soon 400 hours the tire is good as new. I am a bit surprised I may add
Hi Europa pilots/builders I did the mod 73 per instructions five years ago and at first it looked good. After a short while the play was back. My assembly was perhaps a bit tighter then normal so the
Hi Will, One washer on each bolt. I guess there many different approaches and mine was probably not the best but it made my day. The washer was mounted on a wooden stick (about 1/2=9D x 1/2") A slot