2.60 REPLY_TO_EMPTY Reply-To: is empty hello, does anyone have any feedback for the "FF1" fuel computer & and sender that these people supply ? cheers , steve #573 -- Visit EuropaOwnersForum http://w
2.60 REPLY_TO_EMPTY Reply-To: is empty hello MGrass, thanks for that extra info on the FF-2 ,but i have already bought the FF 1 & sender some months back , it is know fitted to my instrument panel, s
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi , looking at the 912S engine from the rear , the bottom left water pipe should be an " 80 deg. type " part no. 922230 - rotax cd s
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi all, if anyone out there has converted their trigear braking system from toe to finger , i am looking for a pair of " BO1 & BO2 "
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty i would like to say a big thanks to all those that contacted me for the toe brake spares , & thanks for the offer of the stb. side dr
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi all , ive got the usual rotax 912S with the standard supplied stainless exhaust , trouble is i can only get 3 out of the 8 springs
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty a big thanks for all the tips - not just me then ! , ive now put the angle grinder away ! i will tackle it again next time the lower
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi, have any builders fitted anchor nuts & screws to one side of the hinge to make the doors removable , they would also be easyer to
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi, yes please, photos would be much app. as im not sure how well screwheads on top of the cowling would look. steve # 573 -- Visit E
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty thanks for the pics gerry, i like the second picture , i hadent thought of making the panel 2 feet in diameter and attaching a turret
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty "I used small countersunk stainless screws which I thought looked OK" yes, i was thinking along those lines but wasnt sure if there w
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi gerry , the correct two pictures have now appeard ! , i like your idea but ive already cut all the hinge slots :-( steve # 573 --
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi, can any builders tell me what an acceptable clearance is between the lower port water pump hose and the top of the exhuast silenc
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty thanks for the replies, i expect i will sleeve it with foil or some other heat reflecting material , i havent installed the ducts for
1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty hi, when you come to bond the side windows in , make sure you put plenty of preasure where the door handles attach , if the perspex i
0.64 REPLY_TO_EMPTY Reply-To: is empty hi, i am shortly - in the next few days , to bond the wing root fairings to the wings , i will be "doing them" in place with the wings rigged, my qustion is, do
0.64 REPLY_TO_EMPTY Reply-To: is empty hi , "Oregon Spruce does indeed now have the patterns for Europa seats", do you have any contact info for these people - or web address ? , thanks , steve #573.
0.64 REPLY_TO_EMPTY Reply-To: is empty hi Raimo, i too constructed the shoot bolts " within a mm " of the manual spec., and , as you have described , i also had variations in the protruding distance
0.64 REPLY_TO_EMPTY Reply-To: is empty hi, can anyone give me details of a supplier of light weight interior carpet so that i can compare it to the cost of a "supplied kit ", thanks , steve #573 by t
0.64 REPLY_TO_EMPTY Reply-To: is empty i would like to thank all who have replied, it looks like im going with the "DIY" carpet . now then , off to complete the other 70% having completed 130% ? (K+W