hello all , has anybody used the built in intercom available on the microair 760 , or do you opt for an external intercom ? it seems there is no separate / independant volume control for intercom / r
hello all, thanks for the replies , it looks as though the external intercom is the way to go for the microair , - or even the xcom 760 radio - it`s internal intercom is more conventional , steve # 5
hello , not sure if this is any use to you but i find it very difficult if not impossible to rig pushing both pip pin and stb allen bolt in at the same time ( ie. both into the port spar then both in
hello tony, if it is any use to you , i was told to fit the landing gear frame as per the manual ( ie 1.5 - 3mm gap behind both vertical tubes ) but , to then round off the top of the front of the co
hello all, i`m just coming to the end of building the flap root extensions and was just wandering what other builders have fitted - if at all - over or under the sight access hole for the flap xtube
well, if that is uk =A3 then someone`s had a bargain - " the two UK demonstrators (50,000) " , i wonder why the demonstrators were sold so cheap at 25000 each ?
hello, not sure if this is any use to you , but i had an intermitent missfire on a rotax 462 two stroke , i eventualy traced the fault to an open ciruit spark plug cap - a new one was ordered --From
Hi All, I have heard from a number of builders that they have recieved a demand for money owed to EMIL, to be paid to Redman Nichols within 7 days. None of them believe they owed anything.We are talk
hello all , i`ve recently fitted the nose wheel and main gear to the fuslage 8 - 9 KG force at the rear of the nose wheel for correct shimmy damping force. thanks in advance, steve # 573
2.60 REPLY_TO_EMPTY Reply-To: is empty many thanks danny & nev , i new there would be a simple answer ! as regards the fishing scales , is there a formula for removing the built in exageration ? chee
many thanks danny & nev , i new there would be a simple answer ! as regards the fishing scales , is there a formula for removing the built in exageration ? cheers
2.60 REPLY_TO_EMPTY Reply-To: is empty hello all, i to am looking for a ring mount for my 912S , so a big thank you for the link to the italian site ( http://www.marc-ingegno.it/ ) - the ring mount i
2.60 REPLY_TO_EMPTY Reply-To: is empty well thanks for that bit of advise duncan , i have emailed the factory to ask them if that mod is incorperated in theirs , it is not clear from the picture on t
2.60 REPLY_TO_EMPTY Reply-To: is empty well i wish i knew all this sooner !, i could have wired the two spare switches on top of the control stick to a servo unit linked to the vents thereby giving m