Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 16 Oct 2011 08:19:38
Hi everyone. Building a NG trigear & need some advice on avionics panel. To simplify matters I was considering using a commercial power panel such as the TRAYMOUNT EXBUS2V, LIGHTSPORT or MINI POWER P
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 4 Dec 2011 18:31:44
Hi all, just setting up the rudder pedals in their tufnol bearings & trying to figure out how you hold the whole lot steady whilst marking out the bolt positions on the unfixed floor !!!!! ?????? Any
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sat, 17 Dec 2011 08:41:55
Hi Gerry, Paul Munford from Cambridge (uk). Very interested in your flying model. Where are you & how much ?? Please contact me directly on pmdental@btinternet.com. Thanks -- Original Message -- From
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Tue, 10 Jan 2012 22:01:10
Hi guys, I'm installing the starboard return spring & there clearly is'nt enough 'footwell' to mount the spring under any tension. Is it ok to fit a small extension piece ( 1/2 in aluminium?) to exte
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Wed, 11 Jan 2012 19:01:20
Thanx for you swift reply. My build manual says, - the front of the forward pedals' tube (on stbd side) should be 3.5 in back from front of the footwell. I've checked my measurements & I'm about 1/4i
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 26 Feb 2012 20:38:37
Hi guys, I'm reaching a stage where I'd like to fit some trim, ( footwells ). Does anyone produce a kit of pre cut parts for the Europa?? (UK based).thanx in advance. Paul Munford kit 625
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 4 Mar 2012 12:15:16
Hi guys I have the latest Europa XS trigear (kit 625), which asks me to change the seals in the brake cylinders to 'nitrile' (included in the kit), - what does this mean in terms of brake fluid? I ha
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Wed, 20 Jun 2012 18:11:13
Hi guys, Paul Munford here, kit 625 tri gear NG. I'm soon to bond the fuselage top & was wondering just how much resin to mix ??? Anyone out there done this job recently ? Also any tips on mixing lar
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sat, 25 May 2013 16:30:11
Help ! I cant quite get my head round how to measure the 30 degrees movement required ?? where do you measure from ? Is it done from top or bottom ? Thankyou in anticipation. Paul Munford, kit 625, X
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 29 Dec 2013 17:59:52
My Europa is now standing on its own three wheels so I have no further use for the support frame. It is a large long triangular construction with braked castoring wheels on each corner. Suitable for
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Wed, 12 Feb 2014 21:55:45
Hi Guys, Paul Munford here kit 625 XS tri gear. Any advice & tips on trimming to fit the doors? As expected there is excess all round but which bits to trim first ? Are there any bits which shouldnt
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sat, 8 Mar 2014 20:54:56
Hi guys & gals, Thanx for your help regarding door fitting - coming along nicely. Got a problem with the door latch. as you can see in the attatched photo. With the inner handle in the fully closed p
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sat, 8 Mar 2014 21:07:57
Hi all. Thanx for you help with door fitting - coming along nicely. As you can see I've got a problem with the doorlatch ? Despite following the instructions to the letter, when the inner handle is i
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 9 Mar 2014 15:27:34
As ever, you guys are great !!! You were right, - by swapping handles, everything fell into place (wish I had a brain ???!!!). Thanx again. Paul Munford. Trigear kit 625 -- Original Message -- From:
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Sun, 19 Oct 2014 19:44:47
Whilst fitting out the interior I'm having real problems holding fixtures in place (whilst resin goes off) with any kind of 'tape'.Whether its masking tape,duct tape, or plastic insulating tape, it j
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Tue, 4 Nov 2014 20:31:40
Hi All, Just getting the pitot system installed & am wondering where the best place for the 2 static ports should be? Ive already installed the Dynon AOA/PITOT probe in the wing thus leaving the stat
Author: Paul & Vanessa Munford <pmdental@btinternet.com>
Date: Mon, 4 May 2015 18:37:33
Hi to all,- hope you can help. Trying to fit drive lugs (x6) into prop flange ?? 1) They are very very tight & I'm worried about getting them halfway in & then not being able to take them out again ?