Thanks, I got it adjusted last night doing it that way. Did the lay-ups tonight and hope to have it finished by end of the week. Dan A144 stabs correctly aligned. My problem is that even before insta
Paul, I reference your site all the time, so don't take it down! Plenty of photos and flight reports will also keep us builders going... and going....and going.... Thanks, Dan Bish A144 Tucson, AZ be
Steve, FWIW, I checked the piece in my kit called "Ply 12" and it's 5 plys of undecernable wood, 1" X 5/8" X 14" so you might be on the right track afterall.
Only problem is I just sent you (went out yesterday to Rob) my part, so it'll have to wait until you're through with it or if someone has a spare they can send to me so I can see if it can be copied.
Hi Tom, I tried to respond to your message but it came back to me....two days later! Weird! Anyway, don't understand the problem with the photos but when it comes to email, anything's possible lately
Tom, Alt hold is available from TruTrak. Just depends on what you want to pay. Conventional wisdom says that the Europa's flight characteristics don't really require it. I'm happy to have some help b
Can anyone out there take a minute to check the dimensions of the FL10 spacer and send to me? It's a spacer that goes at the front connection of the rudder cables, 2 off, shown on Figure 4 Page 22-8.
Thanks for the replies Simon and John. Never noticed that chart before. Will have to pick up some tubing while I'm out. Thanks again and happy building, Dan 4
Michael, I haven't gotten a response to my 3 emails regarding getting a claim form. Is it something that's easy to email and, if so, can you copy me on it? Thanks, Dan A144 Tucson, AZ the amount of t
Speaking of pip pins, I just installed the control column which calls for an optional pip pin on the passenger's side. The one that came with the kit is 3/8" too short and I don't see a replacement i