I spoke to Ray at Europa on Wednesday principally to ask who was supplying the replacement. This could be Europa, Skydrive or Cyclone Hovercraft in the UK. Ray said that as my engine was supplied by
Contact details for Matt Leach are:- 2 The Chapel Perranwell Goonhaven Road Truro TR4 9PB Telephone 01872 571724 I have heard that Mathew Leach does good upholstery work in Europa's, but unfortunatle
Height of Tri-gear on (the old) Europa Tri-gear trailer is 78.5in. Height on its own wheels is 83in. Ian Rickard #505 G-IANI Europa Club Assistant Mods Rep e-mail mods@europaclub.org.uk --Original Me
You can get Barry Mellers on "mellers@totalise.co.uk" I have his address and telephone number if required and will supply it for you off list if required. Ian Rickard #505 G-IANI e-mail g-iani@ntlwor
FOR SALE Michael Engineering Sticky-stuff-Dispenser (the one Europa supplies). New 2000, Very good condition, very low mileage - one Europa, One owner, Reason for sale - its work is (thank goodness)
I must be in the wrong business. Second hand Resin pumps are obviously a very hot property. Sorry but it was gone inside 20 minutes. Ian Rickard #505 G-IANI e-mail g-iani@ntlworld.com How about 150?
"The bolts used to attach the engine to the landing gear frame are described as both AN5-40 and AN5-41 in my copy of the build manual. " The bolts that came with mine were AN5-40 and initially I had
The drawing ga.dxf may have problems. I can open it with M/S Digital image pro. I cannot open it with Autocad Lite (2000) or Irfanview. Both of these report a corrupt or invalid header. This may be a
I had trouble with this. Pins 13 and 26 on the TCU are the Tacho output. I have feed TCU pin 26 to pin 2 on the Rotax Tacho and TCU pin 13 to Rotax Tacho Pin 3 (Rotax Tacho Pin 1 is +12V). TCU Pin 26
hamopt Your email message was temporarily blocked by my spam filter. If you feel this is an error, please follow these instructions. The attached image contains a password. Reply to this email and en
I agree mine work as per the manual so it looks like you have a problem. --From memory I had the same sort of symptoms when I forgot to plug the connector to the TCU disable switch in (i.e. the contr
Paul EGT probes. Mine came with the correct fitting for the Rotax boss. Remember that the EGT sensor is a thermocouple and the probe is only the hot junction. The cold junction is the other end of th
Skymap 3IIIc pinout is:- See page 3-1 of the Pilot Guide & Operations Manual 9 pin "D" connector pin 1 Diferential data (RX Data) pin 2 Data Out (TX data) pin 3 reserved Pin 4 Data in (RX data) pin 5
On behalf of David Schofield Schofield Trailer Lotmead Farm Estate Lower Wanborough Swindon. SN3 4AJ UK David has for sale a partially completed enclosed monowheel trailer. The framework is welded up
I was equally mystified. On contacting Nev I learnt that the two nuts and washer, that ship with the tube, are not required at all. Once you know that the orientation/ location is fairly obvious. Ian
The latest, combined mono and trygear, build manual is available on the Club CD and is 12Mbytes. This was produced for us by the factory and we would want to seek their permission to put it on line.
Hi Tony and Karl I have the factory finger brakes (less the tunnel mount as I have my own tunnel design). I helped a little with the development as I was working on finger brakes as the factory was d
Paul Brodie G-BYFG has a pair of Mecaplex sliding windows fitted. I have a picture if you would like to see it. I have a pair for G-IANI but I decided to leave them out until we have some operational
I had trouble with this. Pins 13 and 26 on the TCU are the Tacho output. I have feed TCU pin 26 to pin 2 on the Rotax Tacho and TCU pin 13 to Rotax Tacho Pin 3 (Rotax Tacho Pin 1 is +12V). TCU Pin 26
Richard The control column lock Tony Renshaw referred to are pictured on Page 17 Europa Flyer No 26, November 2000. You will find this on the Club CD if you have one. If not let me know and I will fo