Hi all, We received the big box of parts on 21 Jan 2004. This is Mike & Mary Baker Benton, Kansas Still working on unpacking and inventory. I have been reading this forum for about 2 months. Would li
Do you put "baby powder' in the tire before you stick the tube in ? Talc should keep the tube from fretting. read baby powder ingredients. __________________________________ http://search.yahoo.com
Viscosity is the key when using HLVP. Most adverts talk about lacquer not urethane. low pressure spatters the paint on in globs. thinning to a point of watery consistency may be the only way to get i
Alodine is a chromate chemical conversion coating. search using that application is easy. wear rubber gloves. usually degrease, Scotch brite, acid etch, and apply alodine, then rinse in water. this i
Powder coat is very abrasion resistant. I think you will get very tired trying to skuff it off. MEK will take it off. Try MEK first. ACE Hardware has it. Wear gloves, bad stuff. evaporates immediatel
Hi All, What kind of fuel lines are being installed. I see alu tube and black rubber hose. What material and temper wall thickness are you using. I really don't want to have to change the fuel lines
Hi all, Big Fly in in Benton, Kansas May 21 2005 Come see us, http://www.bentonairpark.com/metadot/index.pl http://www.airnav.com/airport/1K1 Mary & Mike Baker Benton, KS Europa A286
It's time to help us celebrate the opening of the new FBO! Please help us get the word out to as many pilots as possible. At 7AM it's a free all you can eat Breakfast. Throughout the day we'll have A
I Think What you want is "Mouse MilK" Spruce sells it. Here's the link http://www.aircraftspruce.com/catalog/eppages/mousemilkoil.php Mike Baker __________________________________________________
Mil-DTL-83420 is the general spec that describes the requirements flight co ntrol cables=0A=C2-Composition A - Carbon steel, zinc, or tin over zinc c oated=0Asteel cable is stronger and stiffer than