1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty Hi all, I'm new here and just about to order my kit, I'm in the middle of getting my workshop ready, nearly dun. I want to know if a
0.64 REPLY_TO_EMPTY Reply-To: is empty Just a quick question about insurance? Well 2 questions. Im getting ready to start my new project this coming January, My question is can someone possibly advis
0.64 REPLY_TO_EMPTY Reply-To: is empty Bob, ThanX for you quick reply, I have just spoke with Jennings and They will insure my new project from a starting cost of 139 for stage one of the project. Th
0.64 REPLY_TO_EMPTY Reply-To: is empty Thanx Richard, I will give them a call tomorrow Richard Wheelwright -- Visit EuropaOwnersForum http://www.europaowners.org/
0.64 REPLY_TO_EMPTY Reply-To: is empty Thanx All for your help. I hope when I get officially started with my project that this forum will provide me with useful tips. Thanks again -- Visit EuropaOwne
0.64 REPLY_TO_EMPTY Reply-To: is empty Hi Goff, I'm getting ready to start my own project this coming year, and also would be interested in a build and operating partner, but here is the first proble
0.64 REPLY_TO_EMPTY Reply-To: is empty Hi All, Im looking for some advice on the state of my Ampreg 20 hardener, been a new builder and getting ready for my very first lay-up of the rudder. The harde
0.64 REPLY_TO_EMPTY Reply-To: is empty Jeremy, Jeff, Ivor, Thank you for your advice on the Ampreg 20 Hardener, I did ring Martin Armstrong and he had all the answers I needed in the dis-coloring of
0.64 REPLY_TO_EMPTY Reply-To: is empty [quote:efc33f4e3c="ami at mcfadyean.freeserv"]Don't make the floating lids from polystyrene foam (eg blue foam), because it will dissolve! Duncan McF[/quote:efc
is empty Advice Needed I just want to check something, before I get it wrong. Im setting up the Flaps for the second skin lay-up, Top surface. When I did the first surface, Bottom skin, I set the was
is empty Thanks to all who have replied to the flap washout problem I have, well Now Had as I have now laminated them now, and they look real good and straight, I just hope they will fit the wings, I
is empty Tailplane Pip pin Cover Im getting ready to drill the torque tube for the Tailplane pip pins. Before digging out the Tailplane foam for the pip pin location, I want to get some information o
is empty All, Thank you for all the replies on the pip pin covers. There has been lots of very good ideas and my head is now full. :shock: Ian has suggested that I will have to keep the PFA happy wit
is empty All, As I'm going to use the Pip Pin cover mod, My question is has any one used the stainless steel insted of the steel pins? link below. http://www.nordet.co.uk/stainless_steel.htm The reas
is empty Hi All, Has any one used Alodine 1200 as Alodine 1201 is not available, to treat there alloy parts? I'm also open to other methods, as this seems to be a minefield. Thanks In Advance --
is empty Bob, Thank you for the info. Looks like Alodine is Strong suff in many ways. This may not be the best way to go. I'm also looking as Etch Primer which is readily available from local auto pa
All, Dew to an earlier accident at work this year, I have lost vision in my right eye, which has left me unable to fly dew to loss of medical, my condition is permanent. This has now prompted the sal