Hello, I am looking for a Europa Mono Wheel in good condition. It must be registered in France as importing kits built outside the country is not allowed. I look forward to hearing from you. John Arc
Hello, I am a relative newcomer to the Europa list and a Europa pilot since yesterday, so hello to everyone. I have a mono wheel trailer that is superfluous to requirements so if anyone is interested
Hello, I need to install a battery cut off as I have an electrical load (the stall warning light) and possibly others that are not on a breaker or switch. I intend to install a Sterling IS200 which h
Hello, While changing the shock absorber on my mono wheel I noticed that the 6 mm roll pin that actuates the flaps and outriggers via LG08S had worked it's way out of it's hole by about 15 mm (see bu
Hello, I would also be very interested in a mudguard design, particularly one that prevented/reduced stones being thrown up onto the fuselage and tail plane. I wonder if it would be possible to place
[quote="graeme bird"]I am thinking of getting a batch of aluminum fuel filler pipes made for the classic to replace the rubber trunk. Hello to all, I would like to replace the rubber fuel hose on my
Hi All, During a flight yesterday I had a fairly strong smell of petrol in the cabin just after take off and while in the climb, it lasted about 2 minutes. I recently removed the drip trays from unde
Hi All, during a recent flight I experienced (propeller!) vibration at the start of the descent when I reduced power. This was after about two hours in cruise flight. The frequency was quite high and
Here is an update on my vibration problem. I checked balance of the carburettors they were perfect, checked all engine mounts, carburettor mounts electrical connections on ignition circuit including
To the experts out there who have knowledge of fuel lines and material quality, I would like your opinion on the following tubing. It is rated at 10 bar, has no internal reinforcing but has a cotton
Hello to all, Does anyone have a plan of the tail-wheel stop that bolts onto the Tail Wheel Fork XTW 07 to avoid damaging the cables and rudder horns if the aircraft is pushed backwards? If someone c
Hello, I am looking to upgrade my avionics panel using the aluminium IM04 and IM05! panels. Does anyone have a plan of their profiles in (any format, dxf, solid works or pdf) that I can use to refine
Hello to All, Does anyone happen to know the weight of the Warpdrive 62" tapered blade propeller, XS spinner, it's support and all the necessary hardware? I seem to remember seeing 6.7 kg for the pro
Hello to All, Does anyone happen to know the weight of the Warpdrive 62" tapered blade propeller, XS spinner, it's support and all the necessary hardware? I seem to remember seeing 6.7 kg for the pro
Hi Jon, you can get a gasket set for both carbs for about 40 euros from Avirex here: http://www.avirex.fr/catalogue,22/produits/kits-pochettes-consommables/pochettes,60/ Their prices are competitive,
Hello to all, Just a word of caution about flying into Spain and Portugal there is no full y reciprocal agreement for permit aircraft, at least not with France and I s uspect that applies to the UK a
Hello to all, I am planning to upgrade my avionics panel this winter using a Trig TY 91 radio and a Trig TT 21 transponder. I am thinking of changing the circuit breakers (Europa square type 1, 3 and
Hi to all, I will be modifying my avionics panel and would like to prepare the new one p rior to stripping out the old one. I intend reusing the trim switch, it's position indicator and the square ty
I have become dissatisfied with Airnavpro because of recent "upgrades" which in my opinion have rendered it less user friendly than before. The menu has become more cluttered, the symbols less clear,