Search String: Display: Description: Sort:

Results:

References: [ +from:100031.533@compuserve.com: 48 ]

Total 48 documents matching your query.

1. Intro/Mods (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Mon, 18 Sep 1995 11:58:38
Hi - I'm Rolph Muller, builder 37 - or so Peter keeps telling me - by the way Peter I don't know how you have time to do it but it's impressive. Back to the subject however - I've been building nearl
/europa_forum//html/europa-list/1995-09/msg00027.html (7,508 bytes)

2. Flap/gear setting (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Fri, 29 Sep 1995 09:42:04
I've just been struggling to set the flap deflection to 27 degrees as per the manual, p10-107. As Graham Singleton suggested to me, the problem was that I hadn't enough gear movement i.e. I had made
/europa_forum//html/europa-list/1995-09/msg00055.html (6,957 bytes)

3. Wing front lift pin removal (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Sun, 8 Oct 1995 08:39:24
For anyone about to replace their short lift pins with longer ones, the question is how long to heat them for. I used a pencil torch available from most DIY stores. Heat for one minute, leave for 30s
/europa_forum//html/europa-list/1995-10/msg00011.html (7,220 bytes)

4. Fin close out and rudder fitting. (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Fri, 27 Oct 1995 12:14:58
Not an easy job - at least I didn't find it so. The problem was that I was unable to fit the rudder satisfactorily before completing the fin close out. The plywood panel is of course flat and the top
/europa_forum//html/europa-list/1995-10/msg00080.html (7,408 bytes)

5. Windows (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Mon, 30 Oct 1995 07:19:49
For anyone who has had a fuselage kit for some time and not got around to fitting the windows or inspecting them, it might be worth checking that they are flat - one of mine was slightly dished and n
/europa_forum//html/europa-list/1995-10/msg00095.html (6,875 bytes)

6. Panel Painting (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Wed, 1 Nov 1995 05:02:03
I'd appreciate any advice on this - is the material RD aviation use generally available - any alternatives/preferences - surface prep etc. Thanks in advance Rolph (#37)
/europa_forum//html/europa-list/1995-11/msg00000.html (6,303 bytes)

7. Ignition Switches (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Thu, 2 Nov 1995 09:07:27
Anybody any thoughts on this. I've just got hold of an ACS unit key switch - the standard on lots of aircraft I suppose. Its certainly large and over specified for the Europa with the various mag pos
/europa_forum//html/europa-list/1995-11/msg00005.html (7,073 bytes)

8. Fuselage Kits/Redux (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Sat, 4 Nov 1995 07:42:45
The company seems to have decided that two packs of Redux is the standard issue. However I ran out with just the front screen to bond in. No doubt I should have been more careful with the sizes of mi
/europa_forum//html/europa-list/1995-11/msg00016.html (6,944 bytes)

9. Fitting Windows (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Tue, 14 Nov 1995 11:19:50
A pig of a job - with apologies to lovers of pigs of course! Well at least I found it so. The first side window had to come out after a few minutes - and of course be cleaned up - I clearly hadn't le
/europa_forum//html/europa-list/1995-11/msg00042.html (7,831 bytes)

10. UK Ground Insurance (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Fri, 17 Nov 1995 10:40:20
My policy has just come up for renewal. HR Jennings thro Commercial Union are quoting GBP 198.11 for GBP 30K cover. If anyone knows of a company who can better this, I'd be glad of the info. Rolph
/europa_forum//html/europa-list/1995-11/msg00065.html (6,709 bytes)

11. UK Insurance Ground Cover (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Wed, 22 Nov 1995 16:54:33
Hi everyone. I've only had two replies since my last mailing on this subject. One (thanks Alan) said my insurer seemed very competitive against the Europa recommended one - and another from Polygon a
/europa_forum//html/europa-list/1995-11/msg00087.html (7,497 bytes)

12. Sky Force Colour Moving Map (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Fri, 8 Dec 1995 16:07:06
This should really be addressed to Graham Edward Laucht, but I guess his answer will be of interest to all. Anyway, hello Graham. I'm at the really sticky stage of cutting holes in my panel. The prob
/europa_forum//html/europa-list/1995-12/msg00028.html (7,134 bytes)

13. Panels - again (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Thu, 4 Jan 1996 13:14:42
I'm looking at using either silicone insulated cable and/or ptfe insulated cable as alternatives to pvc. If anyone thinks I shouldn't be I'd like to know! Happy New Year to all rolph
/europa_forum//html/europa-list/1996-01/msg00015.html (6,856 bytes)

14. Engine Installation (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Fri, 26 Jan 1996 08:41:31
For anyone about to move the angled pipe fittings in the water pump housing, Rotax tell me these will move at about 80-90 degrees C. If the worst happens and you damage them and need to replace, use
/europa_forum//html/europa-list/1996-01/msg00080.html (7,044 bytes)

15. Water Pump Refitting (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Wed, 31 Jan 1996 09:18:37
If like me, you didn't do what you were supposed to and didn't note which bolts came from where, then you may need to know the following. The two long bolts are no problem, however the short ones may
/europa_forum//html/europa-list/1996-01/msg00098.html (7,236 bytes)

16. UK Builders -Trailers plus other stuff (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Thu, 15 Feb 1996 03:51:08
It looks as if Gary McKirdy who is based near Banbury will have finished painting my Europa G-RATZ by the end of this month/beginning of March. If there is anybody out there who would like to offset
/europa_forum//html/europa-list/1996-02/msg00041.html (7,310 bytes)

17. Strobes/European requirements (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Mon, 19 Feb 1996 03:43:39
Anybody know if there are any requirements due to legislation and/or insurance requirements? Regards, Rolph Muller
/europa_forum//html/europa-list/1996-02/msg00049.html (6,786 bytes)

18. Wot's the 1mm gap for. (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Sat, 2 Mar 1996 05:28:13
Wondered about this at the time. It's actually rather difficult to see whether the perspex is seating well all the way round the door on a trial fit - it's very obvious when you apply the Redux thoug
/europa_forum//html/europa-list/1996-03/msg00011.html (7,311 bytes)

19. Rotax Engines (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Tue, 5 Mar 1996 05:48:08
Re Peter Davis' comments on buying Rotax engines at discount prices - I tried to obtain one from the factory in Austria through a friend who supplies components to them - totally without success. All
/europa_forum//html/europa-list/1996-03/msg00039.html (6,839 bytes)

20. Fuel Tanks (score: 1)
Author: Rolph Muller <100031.533@compuserve.com>
Date: Tue, 19 Mar 1996 16:13:12
I do agree - having thought about it. My expansion rates were in accordance with Alan's - the walls did bulge most terribly. I did empty the tank and left it some weeks before fitting it and it went
/europa_forum//html/europa-list/1996-03/msg00120.html (7,124 bytes)

Current List: 1 - 20
Page: [1] [2] [3]
This search system is powered by Namazu