Subject: | Re: Fitting the fuselage halves |
---|---|
From: | Graham Clarke <gemin@cix.compulink.co.uk> |
Date: | Thu, 1 Feb 1996 20:56:52 |
I doubt if it was originaly physically shorter as the mould would presumably have ensured that it wasn't. But it certainly sat on the bottom half in a way that gave a shortfall at the tail. I guess the top was convoluted somewhat and the pull straightened it out. Then the clamping and self tapping followed by the Redux maintained it all in the new flatter position, without the need for tensional stress. gemin |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | BMW reduction drive, TMBesch |
---|---|
Next by Date: | January Archive, Peter Thomas |
Previous by Thread: | Re: Fitting the fuselage halves, Simon Townsend |
Next by Thread: | Pondering your brake/puncture problem, Graham Singleton |
Indexes: | [Date] [Thread] [Top] [All Lists] |