I have the carb heat system also - I made my own shields after cutting out the
stock ones and losing the drainage effect - took a lot of time cutting and
fitting
- but does provide a heat shield and complete coverage of the carb for leaks
- ran a tube down the back for dainage of fuel if it should leak - can send
pictures if you wish -
gl
________________________________________
From: owner-europa-list-server@matronics.com
[owner-europa-list-server@matronics.com]
On Behalf Of jpg12305 [jpg.comm@laposte.net]
Sent: Monday, June 13, 2011 7:28 AM
Subject: Europa-List: Heat shields - carbs
After installing the Skydrive carb heat kit, I had to cut the back of my former
standard Rotax fuel/heat shield cups to cope with the extra lenght.
As their function is now only partial (half of the carb bowls unprotected), I
purchased
the fuel recuperation plates that normally come with the standard Rotax
airbox, thinking I could adapt these (912S installation).
I am anyway concerned about how this could be done in a proper way.
Has someone already solved this?
Thanks in advance.
Jean-Paul
Monowheel 332
LFEF
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=342853#342853
|